How to Make a Slat Wall Feature in Your Home
June 07 09:15:55, 2025
If there’s a room in your house that feels a bit uninspired, chances are you’re itching for a makeover. And if you’ve been thinking about adding a wood slat feature wall but aren’t sure where to begin, this post is just what you need!
When it comes to building a wood slat feature wall, you have two main paths: going fully DIY or opting for pre-made panels. Both methods come with their own pros and cons, but today we’re diving into the DIY route to help bring your vision to life. If you’re not quite ready to take on the full DIY project, check out our guide on installing pre-made wood slat wall panels.
Still Undecided Between DIY and Pre-Made Panels?
Pre-built wall panels offer a faster, less labor-intensive solution. These ready-to-go panels eliminate the hassle of measuring, cutting, sanding, and finishing, making them ideal if you’re short on time or prefer an easier installation process. Premium wood slat panels from J Thomas Home are professionally finished to maintain the natural wood grain while achieving a consistent, smooth stain color. With perfectly spaced slats and Grade A acoustic backing material for improved sound quality, these panels are truly a cut above the rest. Starting later this fall, these beautiful panels will be delivered right to your door within 2-3 business days.
DIY Wood Slat Feature Wall
Planning Your Project:
Before you get started, measure the wall’s height and width, choose the type of wood you want to use, and decide on the spacing between the slats. For a modern, sleek appearance, we recommend leaving a gap of ¼ to ½ inch between each slat. You can use a layout calculator to help plan your design. Knowing these details will help you figure out exactly how much wood you’ll need to purchase.
Next, consider whether you want to paint the wall, stain it, combine both finishes, or keep the wood natural. This final touch will set the tone for the entire space.
Gathering Your Supplies:
To create your DIY wood slat feature wall, you’ll need the following materials:
- Wood slats (buy 10% extra to account for mistakes)
- Miter saw
- Tape measure and pencil
- Level
- Nail gun and nails
- Liquid nails
- Wood filler
- Sandpaper (220 grit)
- Stain or paint and brushes/rollers
Preparing the Wall:
Start by cleaning the wall thoroughly to remove any dust or debris. Take out any existing nails or screws and patch up any holes with spackle. Apply a base coat of paint that matches the aesthetic you’re aiming for.
Preparing the Wood Slats:
Cut the slats to fit the height of your wall and notch them to accommodate electrical outlets and switches. Sand the slats with 220-grit sandpaper to smooth out any rough edges or splinters. If you’re planning to stain or paint the slats, this is the best time to do so.
Installing the Wood Slats:
Begin at one corner of the room and use a level to ensure the first slat is straight. Lightly mark where the slat should go, apply liquid nails to the back of the slat, align it with the wall, and secure it using a few finish nails. Repeat this process across the entire wall, making sure each slat is straight and evenly spaced.
Finishing Touches:
Once all the slats are installed, fill in any visible nail holes with wood filler and lightly sand them smooth once they’ve dried. For a polished finish, touch up painted or stained slats in these areas. Step back and enjoy your handiwork.
Building a stunning wood slat feature wall takes time and effort, but the end result is well worth it. You’ll have a unique, personalized wall that reflects your style and gives you immense satisfaction knowing you crafted it yourself.
Shop Our New Wood Slat Walls Today!
Our pre-sale for our new wood slat walls is live! Explore our selection of beautiful wood slat walls right here!
Sponge Scourer,Scrub Pads,Sponge Scrub Pads,Hand Grip Sponge Scourer
Jiangmen Pengjiang Guanqi Trading Co., Ltd. , https://www.kwunkeeindustry.com